Yeah when I think about it, this is true. After all doesn't the "M" in "BMW" stand for for "Motor" loosely translated.

M

I think it stand for Motorsport

Andreas,don think it stands for Motorsport..know it!!!

Shame on your so-called BMW "fans"!!!!

BMW = Bayerische Motoren Werke

M

M = motorsport
BMW = Bayerische Motoren Werke


Two different things Marcus.

EDIT: Sorry Marcus I misunderstood you, thought you meant letter M in M3/M5, I didnt read correct. Now I see, you meant M in BMW.

Detroit 2008: BMW's twin-turbo 4.4L V8

- ONLY REGISTERED AND ACTIVATED USERS CAN SEE ALL LINKS - CLICK HERE TO REGISTER

BMW's twin-turbo 3.0L inline-six has been a rousing success, with nothing less than a Wards 10 Best Engines award sitting in its trophy case. The praise is understandable and well-deserved, as the engine uses a combination of forced induction and direct injection to serve up a torque curve that's far beefier and flatter than what should be expected from a engine of its size. So what next for the propeller brand? Simple -- take similar technology, add it to the company's 4.4L V8 and toss in a dash of unconventional packaging to make everything fit.

BMW put its latest jewel on display at the 2008 Detroit Auto Show, and we snapped some shots of it to give you an idea of why this engine is so special. We've included those photos in one of our galleries, and below the fold, we've thrown in a few observations.

Gallery: - ONLY REGISTERED AND ACTIVATED USERS CAN SEE ALL LINKS - CLICK HERE TO REGISTER

- ONLY REGISTERED AND ACTIVATED USERS CAN SEE ALL LINKS - CLICK HERE TO REGISTER - ONLY REGISTERED AND ACTIVATED USERS CAN SEE ALL LINKS - CLICK HERE TO REGISTER - ONLY REGISTERED AND ACTIVATED USERS CAN SEE ALL LINKS - CLICK HERE TO REGISTER - ONLY REGISTERED AND ACTIVATED USERS CAN SEE ALL LINKS - CLICK HERE TO REGISTER - ONLY REGISTERED AND ACTIVATED USERS CAN SEE ALL LINKS - CLICK HERE TO REGISTER


- ONLY REGISTERED AND ACTIVATED USERS CAN SEE ALL LINKS - CLICK HERE TO REGISTER

Undoubtedly, the most unique feature of the 4.4L TT is the packaging of the turbochargers in the valley between the cylinder banks.

- ONLY REGISTERED AND ACTIVATED USERS CAN SEE ALL LINKS - CLICK HERE TO REGISTER

This is made possible by the swapping of the intake and exhaust ports in the cylinder heads, with the exhaust now exiting towards the middle. This allows the turbochargers to be mounted in the valley with minimal plumbing, which means less bulk, lower weight and better efficiency.

- ONLY REGISTERED AND ACTIVATED USERS CAN SEE ALL LINKS - CLICK HERE TO REGISTER

Immediately after exiting the turbochargers, the exhaust gases enter the catalysts. It's important to keep the cats as close as possible, as the exhaust carries heat that is required for the converters' operation.

Packaging the cats in this location underneath the hood must present some interesting insulation challenges!

- ONLY REGISTERED AND ACTIVATED USERS CAN SEE ALL LINKS - CLICK HERE TO REGISTER

Instead of expensive variable-vane technology, each turbo makes use of fixed geometry and relatively simple wastegates.

- ONLY REGISTERED AND ACTIVATED USERS CAN SEE ALL LINKS - CLICK HERE TO REGISTER

Each compressor is fed via a black oval-shaped duct, as shown above.

- ONLY REGISTERED AND ACTIVATED USERS CAN SEE ALL LINKS - CLICK HERE TO REGISTER

Between the compressor outlet and the intake manifolds lie a pair of air-to-water intercoolers, one for each bank. Such an intercooler reduces packaging volume and tract length compared to a top- or front-mounted air-to-air heat exchanger.

Immediately downstream of the intercoolers lie a pair of electronically-controlled throttle bodies.

- ONLY REGISTERED AND ACTIVATED USERS CAN SEE ALL LINKS - CLICK HERE TO REGISTER

Below each centrally-located coil-on-plug (COP) assembly resides the direct injector, along with the feed lines and fuel rail. It's presumed that piezoelectric injectors are employed here, which are fast enough to allow several injection events per combustion cycle.

- ONLY REGISTERED AND ACTIVATED USERS CAN SEE ALL LINKS - CLICK HERE TO REGISTER

Each fuel rail gets its own fuel-pressure regulator. The operating system of this system is yet unknown, but we're guessing that it's similar to the 200 bar (3000 PSI) that is used in the engine's direct-injection predecessors.

- ONLY REGISTERED AND ACTIVATED USERS CAN SEE ALL LINKS - CLICK HERE TO REGISTER

Dished pistons are used to lower the compression ratio, with a compact ring package to reduce crevice volume and frictional losses.

- ONLY REGISTERED AND ACTIVATED USERS CAN SEE ALL LINKS - CLICK HERE TO REGISTER

The net effect is a peak of 400 HP, with 450 lb-ft of torque delivered between 1750 and 4500 RPM. In a sport sedan such as the 5 Series, this engine will likely erase fond memories of the musclecar era, and even in portly SUVs such as BMW's X5 and - ONLY REGISTERED AND ACTIVATED USERS CAN SEE ALL LINKS - CLICK HERE TO REGISTER, the result should still be rather impressive.


Source: - ONLY REGISTERED AND ACTIVATED USERS CAN SEE ALL LINKS - CLICK HERE TO REGISTER

------------------------

My friend Martin will love this...

This new V8 TT is nothing less than perfect..period

I somehow have this feeling it will get just as much praise as the 3.0 TT engine, if not more....

Does anyone know the weight of the motor? It's dimensions (LxWxH)?